THIS SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND,
WHETHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH ARE
HEREBY DISCLAIMED. IN NO EVENT WILL ELECTRONIC ARTS BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM
POSSESSION, USE, OR MALFUNCTION OF THIS ELECTRONIC ARTS SOFTWARE
SOME STATES DO NOT ALLOW LIMITATIONS AS TO HOW LONG AN IMPLIED
WARRANTY LASTS AND/OR EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS AND/OR EXCLUSIONS
OF LIABILITY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
ELECTRONIC ARTS RESERVES THE RIGHT TO MAKE IMPROVEMENTS IN THIS
FILE AND TO THE SOFTWARE AT ANY TIME AND WITHOUT NOTICE.
THIS FILE AND THE SOFTWARE HEREWITH IS COPYRIGHTED. ALL RIGHTS ARE
RESERVED. NO PART OF THIS FILE OR THE SOFTWARE MAY BE COPIED,
REPRODUCED, TRANSLATED, OR REDUCED TO ANY ELECTRONIC MEDIUM OR
MACHINE-READABLE FORM WITHOUT THE PRIOR WRITTEN CONSENT OF
Electronic Arts Copyright
Software and Documentation (c) 2007 Electronic Arts Inc.
Thank you for downloading the single-player demo of Command &
Conquer 3 Tiberium Wars. This demo will give you a taste of what
to expect from the full version of the game, by letting you
command the forces of the Global Defense Initiative in battle
against the Brotherhood of Nod.
This ReadMe file contains information that may be of use in
getting the most out of your experience with the demo.
Command & Conquer 3 Tiberium Wars requires DirectX 9.0c. You can
install DirectX 9.0c by following the onscreen prompts during the
demo installation process.
REQUIRED SYSTEM SPECIFICATIONS:
· OS: Windows XP, Windows Vista (32-bit; 64-bit versions of
Vista are not supported)
· CPU: 2.0 GHz or higher
· RAM: 512 MB or more
· Hard Drive: 1.4 GB or more of free space
· Video: DirectX 9.0c compatible video card. Video card with 64
MB or more memory and one of these chipsets is required: ATI
8500 or greater, NVIDIA GeForce4 or greater. (ATI Radeon 9200
and 9250 PCI, NVIDIA Geforce 4 MX cards not supported.)
· Sound: DirectX 9.0c compatible sound card
NOTE: While you will be able to play Command & Conquer 3 Tiberium
Wars with the specifications above, play experience may improve if
you have additional RAM, above the required 512 MB.
Before running Command & Conquer 3 Tiberium Wars, please be sure
you have the latest drivers for your video and audio cards
installed. You can download the appropriate drivers from your
video and audio card manufacturer's Web site.
Avoid running any other programs in the background, as this may
conflict with the game. This includes any virus-protection program
that you have running, which can hinder performance.
To install the Command & Conquer 3 Tiberium Wars demo:
1. Double-click "CNC3Demo.exe" in the directory in which you
are reading this file.
2. Follow the instructions that appear to install the demo.
To uninstall the Command & Conquer 3 Tiberium Wars demo:
1. Click on "Start" in the Windows taskbar.
2. Choose "Control Panel".
3. Choose "Add or Remove Programs".
4. Highlight "Command & Conquer 3 Tiberium Wars" and click the
"Change/Remove" button below its name.
5. Follow the instructions that appear to uninstall.
This demo features a sample of the full version's single-player
· An interactive tutorial for new players
· Two different missions from early on in the GDI single-player
· One 1 vs. 1 skirmish map, pitting you as GDI against a
computer-controlled Brotherhood of Nod army
· The entire GDI arsenal at your command, from the Mammoth Tank
to the Ion Cannon
· The entire Brotherhood of Nod arsenal for you to fend off,
including the Obelisk of Light and the Tiberium Vapor Bomb
The full version of Command & Conquer 3 Tiberium Wars features
much, much more, including:
· Three playable factions (GDI, Brotherhood of Nod, and Scrin)
· More than thirty-five different campaign missions
· Twenty skirmish/multiplayer maps for up to eight players
· Five different artificial intelligence "personalities"
· Multiplayer support for up to eight players
A special Kane Edition of Command & Conquer 3 Tiberium Wars is
also available, featuring an exclusive DVD, additional multiplayer
maps, and unique unit skins.
How to Play
The best way to learn how to play Command & Conquer 3 Tiberium
Wars is to click the Tutorial button in the Main menu, where
you'll immediately get hands-on training with the interface, the
units, and base production. In turn, the tutorial will prepare you
for the two GDI campaign missions in this demo, at which point you
should be prepared to try a skirmish against the computer.
You may play the game using only your mouse. However, most
functions of the interface are also assigned to keyboard shortcuts
(aka hotkeys), and some functions are possible only by using the
keyboard. What follows are all the default hotkeys used in this
demo. If you wish to reassign them in the game, select "Options"
in the Main menu, click the "Settings" button, then click the
UNIT COMMANDS and STANCES
Select All Units = Q
Select All of Kind = W
Assign Units to Group = CTRL + # (a number from 0
Select Numbered Group = # (a number from 0 through 9)
Jump to group = Double-tap #
Attack Move = A
Stop = S
Force Attack = CTRL
Assault Move = F
Reverse Move = D
Force Move = G
Scatter = CTRL + X
Planning Mode = CTRL + Z
Waypoint Mode = ALT
Aggressive Stance = ALT + A
Guard Stance = ALT + S
Hold Ground Stance = ALT + D
Hold Fire Stance = ALT + F
Place Rally Point = CTRL + R
Next Harvester = N
Show all Health Bars = CTRL + ~
Jump to Last Map Event = SPACE
Objectives Menu = O
Intel DB = I
Sell Mode = Z
Power Mode = X
Repair Mode = C
Contextual Tab = ~
Structure Tab = E
Support Structure Tab = R
Infantry Tab = T
Vehicle Tab = Y
Aircraft Tab = U
Next Subtab = TAB
Previous Subtab = CTRL + TAB
Place Rally Point = CTRL + R
Sidebar Slot 1 = F1
Sidebar Slot 2 = F2
Sidebar Slot 3 = F3
Sidebar Slot 4 = F4
Sidebar Slot 5 = F5
Sidebar Slot 6 = F6
Sidebar Slot 7 = F7
Sidebar Slot 8 = F8
Sidebar Slot 9 = F9
Sidebar Slot 10 = F10
Unit Ability Slot 1 = CTRL + A
Unit Ability Slot 2 = CTRL + S
Unit Ability Slot 3 = CTRL + D
Unit Ability Slot 4 = CTRL + F
Player Power Slot 1 = CTRL + F1
Player Power Slot 2 = CTRL + F2
Player Power Slot 3 = CTRL + F3
Player Power Slot 4 = CTRL + F4
Player Power Slot 5 = CTRL + F5
Player Power Slot 6 = CTRL + F6
Player Power Slot 7 = CTRL + F7
Player Power Slot 8 = CTRL + F8
Jump to Home Base = H
Set Bookmark 1 = CTRL + J
Set Bookmark 2 = CTRL + K
Set Bookmark 3 = CTRL + L
Set Bookmark 4 = CTRL + ;
Go to Bookmark 1 = J
Go to Bookmark 2 = K
Go to Bookmark 3 = L
Go to Bookmark 4 = ;
Zoom In Camera = Keypad 8
Zoom Out Camera = Keypad 2
Rotate Camera Left = Keypad 4
Rotate Camera Right = Keypad 6
Reset Camera = Keypad 5
There's still more to learn once you've mastered the basics of
Command & Conquer 3 Tiberium Wars. Take heed of the following
excerpts from the instruction manual for superior results in
· Focusing Fire
In general, it is best to try and eliminate opposing forces one at
a time, by ordering a group of units to all attack a single
target. Even a nearly-defeated enemy can still cause considerable
damage, so it makes sense to destroy foes in succession to thin
out their ranks and overwhelm their army. Try to prioritize those
targets that are most dangerous or most vulnerable first.
· Grouping Units
Although it is possible to play the game using only the mouse, you
can play more efficiently with one hand on the keyboard.
One of the most useful key combinations in the game involves
setting up unit groups. Simply select the units you want, press
and hold CTRL, then press any number key. The units you selected
are now assigned to that number key. To select them, press the
number key you chose. To center your view on that group, double-
tap the number key. To add or subtract units from that group, hold
SHIFT and click on the units.
Unit groups are a great way to send coordinated forces into
battle. For starters, try putting all your aircraft in one group,
all your vehicles in another, and so on. Experiment with unit
groups to discover combinations that work best for you.
· Base Building 101
In the game, you'll be spending most of your time in battle. While
combat tactics are important, some battles can be won before they
begin by players who strategically set up their base. The
decisions you make very early in a match often affect the outcome,
so it's important to learn how to build a base quickly and
You can set the exit point of a structure when placing that
structure. Simply click and hold the left mouse button, move
the mouse left or right to rotate the structure, then release
Consider building a Crane right from the start. The principle
benefit of a Crane is that it lets you construct twice as
many buildings in the same amount of time as your
Construction Yard alone.
Consider an early expansion to additional resources (quickly
build a GDI Surveyor from the Support Structures tab), and
always train up at least one extra Harvester for every
Refinery that you build. Harvesters fuel your economy and
therefore must be protected at all costs.
Set up base defenses wherever you may be vulnerable. It may
be tempting to place your unprotected Power Plants near the
back of your base, but an experienced opponent will exploit
While engaged in battle, don't forget about your base. Keep
building until you have access to all the units, upgrades,
and support powers you need to win.
· Unit Veterancy
As your units attack enemy units and structures, they gain
experience. When a unit accumulates enough experience, it gets
promoted to a new veterancy level. A special icon denotes each
veterancy level for each faction, and each veterancy level grants
improved performance capabilities:
Veteran units inflict more damage and are more resistant to
damage compared with non-veteran units.
Elite units inflict more damage and are more resistant to
damage compared with veteran units.
Heroic units inflict more damage and are more resistant to
damage compared with elite units, and also attack more
quickly, automatically heal themselves, and fire red tracers.
· Sell It or Lose It
If your structures come under attack and the situation looks
hopeless, consider selling the structures off before they're
destroyed. Be warned, though, that the amount of credits you get
on resale is reduced the more the building is damaged.
· Fear the Engineer
GDI's Engineers, and their counterparts, the Brotherhood's
Saboteurs, play an important supporting role: They can instantly
take over enemy buildings (as well as tech buildings such as
Tiberium Spikes), if you can get them close enough. To facilitate
this, the GDI and Nod may use the Call for Transport ability to
fly their Engineers and Saboteurs behind enemy lines. While these
units may easily be dispatched even by basic infantry, the shrewd
commander never underestimates their power. To add insult to
injury, try selling off an enemy structure you just captured.
Better yet, have a captured enemy production facility start
cranking out the opposing side's units for you to use.
· Advanced Move Orders
The units in the game are intelligent enough to know how best to
respond to most situations when left to their own devices, or when
given a standard right-click order. For example, they
automatically attack enemy units that come into range. However, as
your gameplay skills improve, you may wish to incorporate the
following advanced move orders into your repertoire in order to
gain a tactical advantage over your foes.
Attack Move (Hotkey: A)
When ordered to attack-move, selected units stop to attack any
opposing units or base defenses along their route. This is an
effective way to meet an opposing force or storm an enemy base.
Assault Move (Hotkey: F)
This variation on attack-move causes your selected units to also
attack any enemy buildings along their route. Units normally do
not automatically attack enemy buildings, so this command can be
useful for laying waste to enemy bases.
Reverse Move (Hotkey: D)
Normally your units move head-first in the direction they're
ordered. The reverse-move command causes them to back up, which
can be faster than ordering them to turn around in some cases.
This is an excellent option for strategic retreats or baiting
tactics, especially because most vehicles have front armor that is
stronger than their rear armor.
Force Move (Hotkey: G)
The force-move command forces your selected units to move to a
designated point--even if the route happens to be right on top of
some enemy units. Use this command to order your tanks to overrun
infantry rather than shoot them. Some of the largest ground units
can even overrun other vehicles.
Formation Move (Hotkey: N/A)
The formation move allows you to move and arrange mixed groups of
units in an orderly fashion. To issue a formation move, press and
hold both mouse buttons at the desired destination for your
selected units, and then move the mouse around. You will see a
variety of different formations you can choose. To select one,
release the mouse buttons. Selected units then move toward the
specified point at the rate of the slowest unit in the group, and
arrange themselves in the designated formation. This is useful for
keeping fast units from outpacing slower ones as they head into
Scatter (Hotkey: CTRL + X)
If your infantry squads are in danger of being overrun, you can
make them spread out using this command.
Place Rally Point (Hotkey: CTRL + R)
This important shortcut lets you set a rally point for the
currently-selected production queue, without having to select the
building back at base. This is a great way to send reinforcements
straight to the front lines in mid-battle.
Waypoint Mode (Hotkey: ALT)
This command lets you queue up multiple orders. It's a great way
to prioritize focused attacks against enemies and enemy
structures, or for setting circuitous routes through enemy
Planning Mode (Hotkey: CTRL + Z)
Planning mode lets you queue up multiple unit orders to your units
that are executed on your mark. To order your units to proceed as
planned, simply toggle off planning mode. This is useful for
diversionary tactics and flanking maneuvers. Planning mode may
also be used to put units on patrol. Simply connect the last
waypoint to your units' point of origin to form a circuit, which
your units will patrol along indefinitely.
· Armor Facing
Tanks and other armored vehicles sustain more damage when attacked
from the side and sustain considerably more damage when attacked
from the rear. Use this knowledge to your advantage and protect
your forces well.
· Infantry Suppression
When fired upon, infantry may become suppressed. When this
happens, you'll see your troops go prone. Suppressed infantry move
slower than usual but are better defended due to their low
profile. In general, the more powerful the weapon, the better it
is at suppressing infantry. Remember this well when considering
how best to use and counter infantry units.
· Infantry Cover
Infantry automatically kneel behind cover when ordered to move
next to civilian structures and other large obstacles in the
environment. Covered units are better defended and nearly
impossible to suppress. Use your knowledge of infantry cover
tactics to gain the upper hand against comparable forces in urban
Each of the three factions in the game has at least one
superweapon--something so destructive it can wipe nearly any
opposition off of the map. These superweapons are ideal for use in
the event of a standoff, when your enemy is deeply entrenched. Be
warned, however, that the moment you construct a superweapon
building, a countdown timer appears that both you and your
opponents can see. Don't be surprised if the enemy redoubles its
efforts to annihilate you before the clock runs out. Yet even
though superweapons are extremely powerful, they may not end the
match. Have some forces on reserve to mop up the remaining forces
as needed. NOTE: The superweapon countdown temporarily stops if
your base runs low on power.
An outdated video or sound driver can lead to slow and choppy
gameplay, or in some cases can prevent the game from running at
all. To ensure an enjoyable experience with this game, be sure
that you have the most recent video and sound drivers installed.
These drivers are typically available for download from your
system or hardware manufacturer’s Web site. If you are not sure
what type of video or sound card you have, or you need assistance
with updating the drivers on your system, please refer to the
documentation that came with your system or peripheral.
For additional help with troubleshooting, visit the community
forums at the official Web site for Command & Conquer 3 Tiberium
Save Games and Settings
NOTE: The options to save one's progress in mid-mission and to
resume play from previously saved games have been intentionally
disabled in this demo (the options are available in the full
version of the game).
However, any Command & Conquer 3 Tiberium Wars save files and
other user-related settings are stored in the "My Command and
Conquer 3 Files" folder, which can typically be accessed by going
to your C:\ drive, opening the "Documents and Settings" folder,
opening the folder labeled with your Windows user name, and
opening the "Application Data" folder. If you don't see an
"Application Data" folder here, do the following:
1. Bring up any Windows Explorer window by holding down the
Windows key on your keyboard and pressing "E".
2. Click on "Tools" from the top menu.
3. Choose "Folder Options" from the drop down menu.
4. Choose the "View" tab.
5. Click on the "Show hidden files and folders" radio button
under "Advanced settings".
6. Click on "Apply" and then "OK".
7. The "Application Data" folder should now be visible.
Command Line Parameters
The Command & Conquer 3 Tiberium Wars Demo supports several
command line parameters that may give you increased flexibility in
the way that you run the game. To set a command line parameter,
you need to do the following:
1. Go to the location of the game's executable. This is
typically found in C:\Program Files\EA Games\Command & Conquer 3
Tiberium Wars Demo\CNC3Demo.exe.
2. Right-click on the CNC3Demo.exe icon and select "Create
3. This will create a shortcut of the executable within the same
folder. This will typically be called "Shortcut to
4. Right-click on this new shortcut and select "Properties".
5. Add a space to the end of the string in the "Target:" field,
followed by a "-" and then the command line parameter.
The following command line parameters are supported by Command
& Conquer 3:
-noaudio (Launches the game without any audio)
-xres (Forces the game to a specific horizontal resolution)
-yres (Forces the game to a specific vertical resolution)
You may experience problems attempting to run the game with a
monitor set to "portrait mode"--that is, if your monitor is set to
display content vertically instead of in a traditional 4:3 or 16:9
aspect ratio. Command & Conquer 3 Tiberium Wars only supports
monitors running in standard 4:3 modes or widescreen 16:9 modes.
You may experience audio and video going out of sync during the
movie cut-scences if you are running on a computer that has Windows
Vista as well as an ATI 9000 series video card.
If some of the audio in the game seems to be missing, such as EVA
voice announcements ("construction complete", "low power", and so
on), this is likely due to your speaker settings. If your speaker
settings are set to a surround-sound configuration, but you do not
have a surround-sound speaker system, then some audio channels
will not be heard during gameplay. To check and adjust your
1. Click on "Start" in the Windows taskbar.
2. Choose "Control Panel".
3a. If your Control Panel is in the default Category View, click
"Sounds, Speech, and Audio Devices". Then click "Sounds and
3b. If your Control Panel is in Classic View, double-click
"Sounds and Audio Devices".
4. Under the "Speaker settings" heading, click "Advanced".
5. Choose the correct configuration in "Speaker setup" drop-down
6. Click "OK".