Navigation
Hip Games has released an updated playable demo of kill.switch, the Namco's military shooter is being adapted to the PC platform by the Bitmap Brothers team. kill.switch will be published and distributed in Europe by L.S.P. Press read more to find details about this game and check our review about the PS2 version. This demo fixes an unspecified glitch with previous demo version...
Gamer's Hell Local Download: Kill Switch v1.0 Demo (77 MB)
kill.switch [TM] and (C) 2003-2004 Namco Hometek Inc. All Rights Reserved
Licensed to Hip Interactive. Hip Games [TM] is a registered
trademark of Hip Interactive Inc. All rights reserved.
Readme File Version 1.0 This document contains last-minute information about the PC version of kill.switch [TM]
(1) Minimum hardware requirements Supported operating systems : Microsoft Windows 98 Microsoft Windows Millenium Edition Microsoft Windows 2000 Microsoft Windows XP Supported hardware : Intel Pentium III 800MHz or above AMD Athlon 900MHz or above 128 MB RAM (for Windows 2000 and Windows XP) 64MB RAM (for Windows 98 and Windows Millenium Edition) DirectX 9 compatible sound card 16x speed CDROM/DVD drive Supported video cards: kill.switch has been tested and designed to work on video cards using the following chipsets: ATI Radeon 7500 Radeon 8500 Radeon 9000 series or better nVidia GeForce 2 GeForce 3 GeForce 4 GeForce FX series or better Matrox Parhelia Intel Intel Extreme 845 (1a) Tweaking Performance To increase the frame-rate on low end PC, set the Resolution to 640x480 in the Graphics Settings in the setup program (this is the default). Please ensure you have the latest drivers for you video card. nVidia cards : www.nvidia.com ATI cards : www.ati.com Matrox : www.matrox.com Intel : www.intel.com Other video cards not in this list may work but are unsupported
(2) Recommended hardware requirements For optimal performance we recommend a PC with at least the following hardware: Pentium 4 or AMD Athlon, 1,5 GHz or higher GeForce 3 or Radeon 9000 series with 64MB RAM or higher
(3) DirectX9.0 kill.switch (TM) requires DirectX 9. When you install the game you will be asked whether you want to install DirectX 9. If you have already installed DirectX 9 or want to install it later, please un-check the appropriate option.
(4) Creative Labs EAX kill.switch (TM) supports Creative Labs EAX on supported sound cards. When you install the game you will be asked whether you want to install the EAX drivers. EAX support is automatically enabled if available.
(5) Dolby Digital kill.switch (TM) supports Dolby Digital(TM) on Nvidia nForce® or other motherboards/soundcards containing the Dolby Digital Interactive Content Encoder required for Dolby Digital audio
(6) Joystick Support kill.switch (TM) can be played with a joystick / game-pad provided the device has two analogue sticks and at least eight buttons. When you select a joystick in Controller Settings the set-up program will attempt to auto-configure the controls for joysticks which it can recognise. However, please ensure that the joystick axes are mapped correctly to the movement and camera controls. Some joysticks / game-pads can have analogue buttons which behave in a similar way to analogue sticks – if these are mapped to the camera controls then the game may not function as expected e.g. camera spinning constantly.
Readme File Version 1.0 This document contains last-minute information about the PC version of kill.switch [TM]
(1) Minimum hardware requirements Supported operating systems : Microsoft Windows 98 Microsoft Windows Millenium Edition Microsoft Windows 2000 Microsoft Windows XP Supported hardware : Intel Pentium III 800MHz or above AMD Athlon 900MHz or above 128 MB RAM (for Windows 2000 and Windows XP) 64MB RAM (for Windows 98 and Windows Millenium Edition) DirectX 9 compatible sound card 16x speed CDROM/DVD drive Supported video cards: kill.switch has been tested and designed to work on video cards using the following chipsets: ATI Radeon 7500 Radeon 8500 Radeon 9000 series or better nVidia GeForce 2 GeForce 3 GeForce 4 GeForce FX series or better Matrox Parhelia Intel Intel Extreme 845 (1a) Tweaking Performance To increase the frame-rate on low end PC, set the Resolution to 640x480 in the Graphics Settings in the setup program (this is the default). Please ensure you have the latest drivers for you video card. nVidia cards : www.nvidia.com ATI cards : www.ati.com Matrox : www.matrox.com Intel : www.intel.com Other video cards not in this list may work but are unsupported
(2) Recommended hardware requirements For optimal performance we recommend a PC with at least the following hardware: Pentium 4 or AMD Athlon, 1,5 GHz or higher GeForce 3 or Radeon 9000 series with 64MB RAM or higher
(3) DirectX9.0 kill.switch (TM) requires DirectX 9. When you install the game you will be asked whether you want to install DirectX 9. If you have already installed DirectX 9 or want to install it later, please un-check the appropriate option.
(4) Creative Labs EAX kill.switch (TM) supports Creative Labs EAX on supported sound cards. When you install the game you will be asked whether you want to install the EAX drivers. EAX support is automatically enabled if available.
(5) Dolby Digital kill.switch (TM) supports Dolby Digital(TM) on Nvidia nForce® or other motherboards/soundcards containing the Dolby Digital Interactive Content Encoder required for Dolby Digital audio
(6) Joystick Support kill.switch (TM) can be played with a joystick / game-pad provided the device has two analogue sticks and at least eight buttons. When you select a joystick in Controller Settings the set-up program will attempt to auto-configure the controls for joysticks which it can recognise. However, please ensure that the joystick axes are mapped correctly to the movement and camera controls. Some joysticks / game-pads can have analogue buttons which behave in a similar way to analogue sticks – if these are mapped to the camera controls then the game may not function as expected e.g. camera spinning constantly.
Kill Switch Updated Demo
(77.68MB)
None
